Página 1 de 1

[SA/Ajuda] Luzes de prédios meio apagadas a noite com SkyGfx

Enviado: 22 Set 2022, 14:03
por Samurai
Isso não me incomoda e não é um problema exatamente, é só uma preferência. Eu tenho alguns carros que ficam com cores bugadas usando o Skygfx, e quando vou usá-los eu desativo o mod. Mas eu tou tendo esse resultado na noite com Skygfx:  

Imagem

Agora sem: 
Imagem

Eu tou usando a última atualização, e não alterei nada na configuração. Se alguém poder me ajudar me dando algumas configurações no mod que eu preciso alterar pra ficar o resultado da segunda imagem, agradeço.

Re: [SA/Ajuda] Luzes de prédios meio apagadas a noite com SkyGfx

Enviado: 23 Set 2022, 12:45
por kaiqueknup
ao meu ver isso me parece alguma configuração. tente colocar as minhas pra ver se melhora:

[SkyGfx]
; Modern configuration
; For SkyGfx Extended version

;; If you leave the value empty (e.g. buildingPipe= ) or remove the line,
;; the default PC setting will be used, in some cases the game code will not
;; even be touched then. This might be useful should there be incompatibilities
;; with other mods.

;; Hotkeys for toggling in game
;;  The numbers below are VK keycodes, you can look them up on https://msdn.microsoft.com/de-de/librar ... s.85).aspx
;;  I'm aware this is super shitty. Set to zero or remove the lines to disable.
keySwitch=0x79          ; cycle through inis (0x79 = F10)
keyReload=0x7A          ; reload all inis (0x7A = F11)

;; Texture modulation:     ps2Modulate(Building|Grass)
;;   Emulates the PS2 way of texture modulation.
;;   In practice this means the world and grass will be brighter
;; Dual pass:              dualPass(Default|Ped|Building|Vehicle|Grass)
;;   Enables dual pass to fix alpha issues (emulates PS2 behaviour). This could affect performance
;;   NOTE: set TwoPassRendering=0 in SilentPatch when using dualPassBuilding=1
;; These are used as fallback if the fine tuned settings are not set:
ps2Modulate=0
dualPass=1

;; Render Pipelines
buildingPipe=PS2        ; Select the building pipeline settings to be used, they only differ in reflection and lighting
                        ;  values: "PS2", "Xbox"
                        ;  otherwise the pipeline will not be hooked (in this case this setting cannot be changed at runtime)
detailMaps=1            ; Enable mobile detail maps (needs texdb files)
stochasticTexturing=1   ; Enable the use of procedural stochastic texturing shader to remove repeating patterns on stochastic textures, like grass, concrete etc (needs texdb files)
vehiclePipe=Env         ; Select the vehicle pipeline to be used
                        ;  values: "PS2", "PC", "Xbox", "Spec" (like PS2 but with specular lighting), "Neo" (like III/VC Xbox), "LCS", "VCS", "Mobile", "Env"
                        ;  otherwise the pipeline will not be hooked (in this case this setting cannot be changed at runtime)
envMapSize=1024          ; Size of the reflection map used for Neo, LCS, VCS, Env and Mobile car reflections (rounded up to next power of 2).
envMapFarClipMult=1.0   ; Multiplies the camera far clip for reflections. Increase it for more accurate reflections, decrease it for better performance at the cost of fewer objects in the reflections.
leedsShininessMult=1.0  ; Leeds reflection intensity multiplier
neoShininessMult=0.7    ; Neo reflection intensity multiplier
neoSpecularityMult=0.5  ; Neo specular light intensity multiplier
envShininessMult=2.0    ; Env reflection intensity multiplier
envSpecularityMult=0.5  ; Env specular light intensity multiplier
envPower=10.0           ; Env specular light power (the higher the smaller the highlight)
envFresnel=0.7          ; Env fresnel strength
sunGlare=0              ; Sun glare on cars like in VC

;; Grass
grassAddAmbient=1       ; Add current ambient light to grass color like on the PS2
grassFixPlacement=1     ; Fix the grass placement bug in the PC version. There is hardly a reason to disable this
grassBackfaceCull=0     ; Enable or disable backface culling for grass. PS2 has it disabled, PC has it enabled. This could affect performance

;; Shadows (if unset game settings will be used)
; pedShadows=0            ; Enable dynamic ped shadows
; stencilShadows=0        ; Enable stencil shadows (vehicles and poles)

;; Color filter
; colorFilter=Mobile    ; Select the color filter
                        ;  values: "PS2", "PC", "Mobile", (needs colorcycle.dat), "None",
                        ;  experimental (need proper timecycle): "III", "VC", "VCS" (uses VC colorFilter, enable vcsTrails)
rgb1Mult=1.0            ; Tweak rgb timecycle values. Useful if you use timecycle with too low or too high color values for that specific color filter
rgb2Mult=1.0
; usePCTimecyc=1        ; Uncomment this if you use a PC timecyc.dat instead of a PS2 timecyc.dat or any timecycp.dat
blurLeft=   0           ; Override PS2 color filter blur offset from stream.ini (comment out to use values from stream.ini)
blurTop=    0           ;  to disable blur set these to 0
blurRight=  0
blurBottom= 0
;; Radiosity
doRadiosity=1           ; Enable or disable radiosity (comment out to use pe_bRadiosity from stream.ini)
radiosity=Shader        ; Select implementation. values: "Shader", "PS2"
;; Trails
vcsTrails = 0           ; Enable or disable VCS trails (part of radiosity; not compatible with PC/PS2 color filter) (EXPERIMENTAL)
trailsLimit = 80        ; Normally set by VCS timecycle
trailsIntensity = 15    ; Normally set by VCS timecycle
trailsResolution = 1    ; Increase it for sharper trails
;; Misc
disableClouds=0         ; Disable the far clouds on the horizon. They're bugged on the PS2. (cannot be toggled at runtime)
disableGamma=1          ; Brightness slider doesn't change gamma (cannot be toggled at runtime)
neoWaterDrops=1         ; Use Neo water drops on screen (cannot be toggled at runtime)
neoBloodDrops=1         ; Use Neo water drops on screen (requires neoWaterDrops)
transparentLockon=1     ; Use transparent rocket lock on like on PS2 (cannot be toggled at runtime)
lightningIlluminatesWorld=1    ; Lightning flash only illuminates the sky on PS2 but world geometry too on PC
fixPcCarLight=1            ; removes fixed PC car diffuse and ambient light (cannot be toggled at runtime)
coronaZtest=0            ; z-test on coronas. 0 to disable (PS2), 1 to enable (PC) (overrides SilentPatch)
fixShadows=0            ; fix z-problems with shadows as on PS2. tends to break with high far clip plane (cannot be toggled at runtime)

;; Modify final colors in YCbCr space
; YCbCrCorrection=0    ; turns this on or off (default 0)
; lumaScale=0.8588    ; multiplier for Y (default 0.8588)
; lumaOffset=0.0627    ; this is added to Y (default 0.0627)
; CbScale=1.22        ; like above with Cb and Cr (default 1.22)
; CbOffset=0.0        ; (default 0.0)
; CrScale=1.22        ; (default 1.22)
; CrOffset=0.0        ; (default 0.0)

;;;;;
;;;;; Advanced fine tuning
;;;;;

; When disabled, don't hook. Attach building pipe on all models with two sets of vertex colours (this breaks the parachute animation)
; When 0, like above but don't override explicitly set pipelines
; When 1, only attach building pipe when explicitly set by dff (like Xbox and PS2)
; explicitBuildingPipe=0
;; Building pipe for tags, these override buildingPipe for tags (PS2 tags don't support semi transparency)
tagsBuildingPipe=Xbox
;; PS2 texture modulation, these override ps2Modulate
; ps2ModulateBuilding=1
ps2ModulateGrass=1
;; Dual pass, these override dualPass
; dualPassBuilding=1
; dualPassVehicle=1
dualPassGrass=0
; dualPassPed=1
; dualPassDefault=1       ; everything else
;; This value controls the threshold of the dual pass below which Z is not written
zwriteThreshold=200        ; Set to 255 to get Silent's dual pass effect (default 128)

;; PostFX
; These three are tied to colorFilter if not explicitly set:
; infraredVision=PS2      ; Select the infrared vision
;                         ;  values: "PS2", "PC"
; nightVision=PS2         ; Select the night vision
;                         ;  values: "PS2", "PC"
; grainFilter=PS2         ; Select the grain filter for infrared, night vision and rain
;                         ;  values: "PS2", "PC"

;; Radiosity settings
radiosityFilterPasses=2      ; How often the frame will be downsampled (dimensions are halved each time) (default 2)
radiosityRenderPasses=1      ; How often the radiosity effect will be applied to the frame (default 1)
radiosityIntensity=35        ; Multiplier for radiosity intensity (default 35)

 

Re: [SA/Ajuda] Luzes de prédios meio apagadas a noite com SkyGfx

Enviado: 23 Set 2022, 16:18
por Samurai
kaiqueknup escreveu:
23 Set 2022, 12:45
tente colocar as minhas pra ver se melhora
Valeu cara, mas continuou a mesma coisa. Acho que se eu escolher a configuração  PC, isso não acontece. Mas eu não quero deixar de usar os benefícios da modern. 

Re: [SA/Ajuda] Luzes de prédios meio apagadas a noite com SkyGfx

Enviado: 23 Set 2022, 23:32
por kaiqueknup
Vc tem instalado o GraphicsTweaker junto com o
Real Linear Graphics? eu tenho os dois e funciona beleza junto com essa config q te passei